Aeroflex - Products - INSULATIONS - Insulations for cooling and heating systems

Skype
Facebook
CZ SK EN DE PL CR SI
Homepage  >  Products  > INSULATIONS  >  Insulations for cooling and heating systems

menu

Insulations for cooling and heating systems


Insulations for cooling and heating systems
Insulations for cooling and heating systems
Insulations for cooling and heating systems
On the basis of EPDM of -125 ° C to + 175 ° C
 
Thermal insulation made of synthetic rubber (EPDM) without additives and without PVC freon. This makes it soft and flexible, long-term bear temperatures up to 175 ° C, is very resistant to UV and weathering and ozone. Excellent insulation properties (thermal conductivity at 40 ° C 0.04 W / mK). DN indicates the diameter of the hole in isolation, ie max. The outer diameter of the tube (mm).

PE insulation up to 90 ° C

 
Insulating for polyethylene-based gray developed to isolate piping water, heating, plumbing, and so on.

        Temperature range: -40 ° C to 105 ° C
        Thermal conductivity = 0.040 W / m * K at an average temperature of 40 ° C
        flammability C3
        Pipe length: 2m
 
Rock wool to 230 ° C or more - PAROC



1. Hot water pipe and cold water

- Any loss of heat in hot water heating pipe and an unnecessary loss of energy
- Decreasing too hot water temperature = increased risk of spreading diseases (eg. Pontiac fever or legionellosis).
- Bacteria thrive at temperatures between 25-45 ° C, with the optimum for them is 35 ° C.
- Reduce the risk of proper insulation + prevent the temperature drop of water on these critical temperatures.
- Cold water pipe and the air conditioning duct to be isolated against condensation, prevents the transfer of heat from the environment and prevents the water from freezing in the pipe
- Isolating the surface of the working face so that the outside surface temperature of insulation was above the dew point of the ambient air.
- The insulation against condensation, it is important that the tip of the insulation, and all joints between pipe sections are well insulated tape
- Condensing water causes: the growth of mold and the neighboring buildings, color ceilings and floors and damaging the pipe itself

2. Leads rainwater and waste water pipes


- Leaky pipes and waste water pipes isolated inside buildings against condensation and, depending on local specifications, it is also necessary to insulate against fire and noise in certain areas.

3. Leads rainwater and waste water pipes


- Pipe adapters need to be addressed when the pipe passes from one fire area to another, creating a potential channel, which could spread the fire in the building. To avoid this risk, it is necessary to insulate non-flammable insulating material. Products PAROC stone wool is non-combustible and provide excellent fire protection piping reducers in walls, floors and ceilings.





Offered range of goods


  Name Description
Insulation sheets Insulation sheets The sheet made by EPDM rubber is available in standard sheets and endless sheets in thicknesses: 6 mm, 9 mm, 13 mm, 16 mm, 19 mm, 25 mm, 32 mm, 38 mm, 50 mm Long-term stable life with low thermal conductivity (K - value). Met international standards against smoke and flammability. Excellent resistance to ozone / UV and weather resistance. Installation work are simple, elegant and flexible. Excellent resistance to moisture, mold growth, proliferation of insects and rodents.
Insulations pipes made by EPDM Insulations pipes made by EPDM EPDM (ethylene-propylene diene monomer) - Isolation of a closed cell structure based on the elastomer. Ideal for applications with resistance up to + 175 ° C, in exterior is not necessary to protect the surface of insulation additionally, resistant to UV and ozone. EPDM rubber is asbestos-free, it is suspended and is fiber-free material. Suitable for areas where a high degree of hygiene. It is accepted as a replacement for fibrous material to isolate the steam piping. It is an excellent insulation material at low temperatures, even during shutdown of the heating system. Resistant to moisture and steam, long service life with low heat transfer, easy installation. Excellent behavior during combustion!
Insulation tubes made by PE Insulation tubes made by PE Insulating tubes polyethylene-based CFC gray intended to isolate the pipe water, heating system and sanitary Temperature range: -40 ° C to 105 ° C, thermal conductivity λ = 0,040W / m * K at an average temperature of 40 ° C Flammability C3 Reduction of up to 23 dB (A) Tube length: 2m - Under realistic conditions, possibly saving 1,21 liters of heating oil per square meter of living space per year. In a detached house with a floor area of 170 m2 can save up to 200 liters of fuel oil. At a price of 0.65 EUR per liter, this means an annual saving of over 130 euros - a significant contribution to reducing CO2 emissions and the environmental protection. Just this one measure could prevent the escape of 562 kg of CO2 into the atmosphere each year. Pipe insulation is therefore not an expense but rather an investment in our future.


Contact form
Name and surname
E-mail address
Telephone
Request
Please write the code
  


Once you would come by our company from 7:30 - 16:00, you are warmly welcome to come drink a cup of coffee.